Submersible
Building service
Industrial
Effluent
Dewatering
Drainage
Semi-open vortex
Stainless steel
・Main components with stainless steel is optimized rust resistance and capable of withstanding corrosion for light chemical duty.
・Semi-vortex impeller permits foreign matter passing sized 40 to 63% of discharge diameter.
・Built-in motor protector protects the motor from overload or open phase.
・Optional quick discharge connector facilitates easy installation and maintenance.
| Liquid | Type | Several kinds of liquid with foreign particle (pH 5-9) | |
| Temperature | 0℃ to 40℃ | ||
| Max solids size |
Pump size | Solid size | Fiber length |
| 50 | 21mm | 150mm | |
| 65 | 33mm (41mm for 2.2kW and above) | 200mm (245mm for 2.2kW and above) | |
| 80 | |||
| Max. Submergence level | 4m : 1.5kW and below 8m : 2.2kW and above | ||
| Pump | Construction | Impeller | Semi-vortex |
| Shaft Seal | Double mechanical seal | ||
| Bearing | Sealed ball bearing | ||
| Material | Casing | SCS13 | |
| Impeller | SCS13 | ||
| Shaft Seal | SIC/SIS : lower side | ||
| Ceramic vs carbon : upper side | |||
| NBR : Rubber | |||
| Moter | Type/pole | Airfilled submersible motor / 2 Pole | |
| Phase/voltage | 3phase | ||
| Material | Frame | SCS13 | |
| Shaft | SUS304 | ||
| Cable | VCT : 1.5kW and below | ||
| Anti-heat VCT : 2.2kW and above | |||
| Flange | JIS 10K Thin type | ||