Capacities To 700 m3/h (50Hz)
Heads To 150 m
Liquid temperatures -10℃ to 120℃
Max. working pressures 1.6MPa
Standard allowable boost pressure 1.6 – “Shut-off pressure” MPa
Construction Impeller Closed, single suction type and balancing holes to reduce axial thrust
Shaft seal Single mechanical seal based upon EN12756 (Conical type)
Pump Bearing
Materials Casing Cast Iron (FC250)
Impeller Cast iron (100/125/150-400: FCD400, other models: FC200)
Bronze (CAC406)
Shaft SUS420J2Q (Wetted part)
Applicable pump standard EN733
Applicable flange standard EN PN16